Discs for conventional or for UV inks, 50 mm width, for the IGT Orange Proofer

Rubber and rubber blanket discs for conventional and UV inks, up to 35 mm wide.

Rubber and rubber blanket discs for conventional and UV inks, up to 50 mm wide.

Rubber and rubber blanket discs for conventional and UV inks, up to 70 mm wide.

Rubber and rubber blanket discs for conventional and UV inks, up to 20 mm wide.

Copper engraved, chromium plated and laser engraved ceramic anilox discs

Copper engraved, chromium plated gravure discs with different engravings.

Discs to be used in combination with a GST tester.

All discs for the older types of IGT testers.

Attachment to execute Damping or Water interference mottling tests on GST 2.

Set to execute IGT Roughness tests on the AIC2-5, different versions, the Global Standard Tester 1 or 1W and for the A1-3 or A2-3

Accessory to execute Print penetration tests on the AIC2-5 different versions, the Global Standard Tester 1 or 1W or the A1-3/A2-3

Attachment to execute Gravure tests on AIC2-5, Global Standard Tester 2 / 3H

Attachment to execute Damping or Water interference mottling tests on AIC2-5T2000

Attachment to execute Heliotest on AIC2-5, A1-3, GST 2 or GST 3H.

Attachment to execute Westvaco pick test on AIC2-5, A1-3 or GST 1W.

Accessory to determine fluff and loose paper particles in combination with an IGT printability tester. Consists of a holder, a test arm with disc holders and weight, steel and a rubber printing disc and a weight. Includes packings, fluff ink and pick test oil.

Resolution of 0.01 or 0.001 ml, volume 2 ml, on request with calibration certificate.

Device to evaluate the pick start, conform ISO 3783.

Compact UV dryer for use with printability test equipment.
Version with fixed curing power and variable speed.
Several light sources available.

Compact UV dryer for use with printability test equipment. Version with variable, controlled curing power and variable speed.
Several light sources available.

The IGT Glossmeter G60 is designed and manufactured in accordance with ISO2813, ASTM D2457, ASTM D523 and GB9754, GB/T13891, GB7706 and GB8807. The model G75 is in accordance with ISOxxx and TAPPI xxx

Light booths for colour evaluation and comparison under controlled light circumstances.

Temperature controlled waterbaths for use with a High Speed Inking Unit 4 or the IGT Tack Tester 450.
Version with intenal cooling and a version cooled through an extenal medium.

Crumpling device specially used for banknote testing, includes plunger and pressure tube.

Accessory fitting on all NBS crumpling devices to automate the pressuring process.

Cobb tester specially adapted for the use of samples for the NBS crumpling device, complete with timer, roller, cutting template, and rolling surface.

Cobb tester, standard version for paper and board, incl. electronic timer, roller, quenching plate and template.

Cobb tester for tissue paper, incl. electronic timer, roller, quenching plate and template.

Cobb tester for corrugated board of 8 or 15 mm , incl. electronic timer, roller, quenching plate.

Cobb tester for additional penetration measurement, including or excluding the measurement of transparent materials, including electronic time, temperature and penetration sendor, analysis software, RS232 interface and cable, roller, quenching plate and template.

Block tester for 5 block pressures:
100: 5x 10 N
200: 5x 50 N
300: 1,25; 2,5; 5; 10; 20 N
400: 2,5; 5; 10; 20; 50 N
500: 10; 20; 20; 50; 50 N
600: 5x at choice

PLG06 Sizing Tester, using a photocell, PLG 06V uses a video camera to determine the sizing of the coating. Incl. analysis software.

Digital paper thickness gauge, conform ISO 534 max 2.5 or 5.0 mm.
Can also be used with large sheets or small reels.

Advanced models hygrometer swords to measure the humidity of the paper in the stack. 250 and 400 mm long version. Comes with Charger, calibration standards, and calibration device.

A universal set of sensors to measure temperature and relative humidity in the room, in a bale, in a roll or on a sheet. Comes with a charger/power supply, calibration standards, calibration device and one sensor.