-
C1
IGT C1: Printability tester to produce colour prints with conventional and UV offset inks (35mm)INFORMATION -
C1-5
IGT C1-5: Printability tester to produce colour prints with conventional and UV offset inks (50mm)INFORMATIONC1-5
Printability tester to produce colour prints with conventional and UV offset inks, for prints of 50 mm width.
-
C1-7
IGT C1-7: Printability tester to produce colour prints with conventional and UV offset inks (70mm)INFORMATIONC1-7
Printability tester to produce colour prints with conventional and UV offset inks, for prints of 70 mm width.
-
C1-V
Printability tester to produce colour prints with conventional and UV offset inks with five different printing speeds.
-
CG1
Printability tester to produce colour prints with conventional and UV offset inks and to cover with lacquer or varnishINFORMATIONCG1
Printability tester to produce colour prints with conventional and UV offset inks and to cover with lacquer or varnish.
-
CTx3
Printability tester to produce colour prints with conventional and UV offset inks prints on cans and tubes with inner diameter between 16 and 68 mm, width of the print 3×15 mm or 35 mm.
-
Cx3
Printability tester to produce colour prints with conventional and UV offset inks,prints three strips, of 15 mm wide, besides each other.
-
Drying Time Tester
Designed to determine the absorption behaviour and drying time of inksINFORMATIONDrying Time Tester
The Drying Time Tester is designed to determine the absorption behaviour and drying time of inks printed on paper, carton, plastic or metal foils.
-
F1
Printability tester for flexo inks, can also be used for gravure prints, performed with anilox and photopolymer cleaning mode.
-
F1 Basic
The F1 basic is for flexo printing only, a universal flexo tester for use with solvent based inks, UV inks and water inks on a range of substrates.
-
Heatset Dryer
Instrument to compare the drying of a heat-set ink directly against a standard at the same conditions of temperature and exposure time.INFORMATION -
Orange Proofer 70
Dedicated tester to produce colour prints of conventional and UV offset inks. The Orange Proofer 70 has a printing width of 70 mm.
-
Orange Proofer M
Orange Proofer M: Printability tester to produce colour prints with conventional and UV offset inksINFORMATION -
Orange Proofer x3
Printability tester to produce colour prints with conventional and UV offset inks, with a 3-position printing shaft for three densities of three colours on the same strip.
-
Simply Gravure
Simply Gravure: printing device for the production of colour prints with gravure inks.
-
Simply Offset
Simply Offset: Print unit to produce colour strips with conventional or UV offset inksINFORMATIONSimply Offset
Simply Offset: Print unit to produce colour strips with conventional or UV offset inks.
-
Ink Rub tester (Sutherland type)
Ink Rub tester to test rub resistance under specified pressure, speed and temperature.INFORMATION -
Quartant Abrasion Tester
Rub tester, which is capable of testing four samples simultaneously.INFORMATION