skip to Main Content
Need help? Call us +31 20 40 99 300

Cobb Tester SFT 03t 22 for building boards up to 22 mm

Cobb Tester SFT 03t 22 for building boards up to 22 mm

Standard delivery time: 4-6 weeks
Article number: 570.000.322 Categories: ,


Absorbency-testing device is used for determining the absorption of liquid mediums, by paper from the top and bottom sides within a predetermined time.

The IGT Cobb tester is an absorbency-testing device used to determine the absorption of liquids, such as water, aqueous solutions, oils, varnishes and others, by paper, paperboard and corrugated board within an accurately, predetermined time, in accordance with ISO 535, Scan P-37:77 Scan P12, Tappi 441 and Fefco nr. 7.

There are different types of Cobb testers available:

– for determinations on thin substrates like paper and light paper board. A special version is available for light structured papers (e.g. tissue), which can also be used for paper and board

– for determinations on substrates up to 15 mm thickness, like massive board or corrugated board

– for determinations on plaster board construction panels up to 22 mm thickness

– as the standard version with the additional option to measure the absorption curve until the liquid passed through the substrate


In these devices an electronic stopwatch is mounted on the base plate. The cylinder support is connected to a crank with handle and can rotate in the block resulting in a flip-over of the container. The liquid recipient is located in the cylinder support, so that it can easily be replaced. A lid is mounted on the cylinder support by hinges and is secured on the cylinder by means of a locking mechanism. By rotating the ring by moving the handle a signal is given to the stop watch to start timing; at this moment the absorbency has started. At the end of the test a signal is given by the stopwatch. At this moment the ring is moved backwards and a signal is given to the stopwatch and timing is finished.
The tension of the locking spring enables testing of paper and cardboard with different thicknesses. Different versions of the tester are available for standard paper and board, tissue and other low structured materials, corrugated board and for non-standard sample sizes.

  • Inner Ø 112.8 mm
  • Max sample thickness 22 mm
  • Filling amount 100 ml
  • Test area 100 cm²

Technical details

Weight:5 kg
Dimensions(L x W x H):20 cm x 20 cm x 25 cm
Main application:
Conformance with standards/W-leaflet:
Water bath and temperature:
Speed range and modes:
Substrate requirements:
Interval time and number:
Sector positioning:
Sector type and options:
Doctoring system:
Dispensing system:
Pre-programmed tests:
Analysis options:
Software updates:
Data export options:
Additional items:
Accessories:570.001 Quenching roller
570.002 Quenching plate
570.004.100 Template
570.005 Blotting paper
570.007 Cup for 100 ml
Inks or liquids:Liquids
Inking speeds:
Inking programs:
Top rollers:
Compatible instruments:570.000.100 Cobb Tester SFT 03t standard model
570.000.800 EasyCobb
570.000.900 Cobb tester clamp system
Measurement range:Max thickness 22 mm
Light source/ power/angle:
Shelf life:
Use life:
Description of property:
Cleaning:After using the device should be cleaned using a washing solution consisting of de-mineralized water and a washing-up liquid. After this, the device is to be rinsed with plenty of de-mineralized water. The liquid container is made of anodized aluminium.
Power Supply Requirements:Battery type R3, UM 4, 1.5 V for electronic stopwatch
Guarantee:Standard one year
Space requirements:0,09 m²
Standard delivery time:4-6 weeks



Technical Details

Weight5 kg
Dimensions20 × 20 × 25 cm

Dimensions(L x W x H)


, , , ,

Inks or liquids

Compatible instruments

, ,

Measurement range



Power Supply Requirements


Space requirements

Lifting system


Back To Top