橙色打样机 x3

商品编号: 419.000

橙色打样机 x3:印刷适性测试仪,使用传统和 UV 胶印油墨制作彩色印刷品。

专用测试仪,用于生产传统和 UV 胶印油墨的彩色印刷品。还提供带 3 位印刷轴的版本,可在同一条带上印刷三种密度的三种颜色。

  • 重现性高
  • 操作简单
  • 一致的结果

用于胶印油墨的 IGT 橙色打样机成本低、操作简单!

对于临时测试,橙色打样机是检查胶印油墨在各种基材上颜色的最有效方法。
IGT 在向全球各行业提供柔印、凹印和胶印油墨印刷适性测试仪方面取得了巨大成功。由于胶印油墨对低成本、易操作的印刷适性测试仪的需求量很大,IGT 开发了 IGT Orange Proofer,在测试仪不是每周 7 天每天 24 小时使用的情况下,测试结果具有很高的再现性。对于重型应用,建议使用 C1 测试仪。

  • 带压印滚筒和印刷盘的印刷单元,400 克,外覆橡皮布,用于传统油墨
  • 印刷力在 100 牛顿和 900 牛顿之间可调
  • 速度: 0.3 米/秒
  • 上墨装置配有两个铝制滚筒和顶部滚筒,用于传统油墨或 UV 油墨

应用
如今,许多印刷商都有自己的印刷油墨厨房,他们可以使用 Orange 打样机制作色带,以检查印刷机将使用的承印物上的油墨质量。通过这种方式,可以快速检查油墨匹配情况。为提高精确度,强烈推荐使用 IGT 油墨移液器。

操作
墨水涂在着墨装置的顶部滚筒上。分配油墨只需 30 秒。分墨后,将印刷盘放在顶部滚筒上。印刷盘的着墨时间仅需 15 秒。着墨后,将印刷盘放在印刷轴上。承印物被固定在承印物托架上,并置于印刷圆盘轴的下方。施加印刷力后,印刷就自动完成了。

添加到引用

功能

Device can print three prints side by side, but can also print colour strips of 50 mm width. Printing force is motorized set using push buttons.

The best choice if the force is changed regularly, when different substrates and inks will be used.

Inking section

  • Total inked area 720 cm²
  • Two aluminium drums with top roller
  • Both aluminium drums driven for easy cleaning
  • Short inking time: inking 30 s and printing disc 15 s
  • Short cleaning time
  • Independent drive

Top rollers

  • For conventional inks
  • Rubber for UV-curing inks

Printing discs

  • Printing width: 15, 35, 50 mm
  • Print length : 200 mm
  • Weight: < 160 g for most of the available discs

Sorts:

  • Rubber, 65 Shore A, for conventional links
  • Rubber blanket, for conventional inks
  • Rubber, 65 Shore A, for UV-curing inks
  • Rubber blanket for UV-curing inks
  • Aluminium

General

  • Complies with EC directives
  • Modern styling
  • Inking and printing on a single appliance
  • Simple operation
  • Repeatable and reproducible results
  • Reliable
  • Low initial cost
  • Possible to use many substrates and inks
  • Easily movable
  • Detailed instructions for use

Weight: 25 kg
Size: 32 cm x 62 cm x 35 cm
Electrical rating: 115/230 V – 50/60 Hz

技术细节

重量25 公斤
尺寸32 × 65 × 35 厘米
Main application

, , , , , , , , ,

Conformance with standards

, , ,

Forces

Lifting system

Printing discs

,

Additional items

, , ,

Accessories

,

Maintenance

, ,

Compatible instruments

, , , ,

Measurement range

Guarantee

Dimensions (d x w x h) cm

Inks or liquids

Space requirements

Speed range and modes

Standard delivery time

Substrate requirements

Top rollers

,

Weight

视频