For average use a service check once a year is recommended.
Filter
Product categories -
Camera +
Cell depth µm +
Diameter in mm +
Forces +
Inks or liquids +
Lifting system +
Line count l/inch +
Material surface +
Measurement range +
Nr. of doctoring systems +
Nr. of engravings +
Nr. of printing shafts +
Print width in mm +
Screen Angle ° +
Shaft diameter in mm +
Shore A Hardness +
Test method +
Tester +
Type of anilox +
Volume - BCMI +
Volume - ml/m2 +
Water bath and temperature +
Wedge (%) +
Width in mm +
- 48 hours
- Accessories
- Consumables
- Crumpling device
- Electronics testers
- Gloss meters
- Graphic Testers
- Ink kitchen
- Ink Testers
- No categorie
- Other Testers
- Packaging testers
- Paper Testers
- Printing discs
- Rub tester
- Security
Filter categoryShowing all 9 results
-
C1x3
To print to print three strips, of 15 mm wide, besides each other.
View product -
CG1-5
Printability tester to produce colour prints with conventional and UV offset inks and to
View product -
CT1 for Tubes & Cans
To print directly on cans and tubes with inner diameter between 16 and 68 mm. Print
View product -
CT1x3 for Tubes & Cans
To print directly on closures, cans and tubes with inner diameter between 16 and 68 mm.
View product -
F1
Flexo proofer. Can also be used for gravure prints
View product -
F1-100
F1-100: printability tester for flexo inks; 95 mm print width
View product -
Orange Proofer 70 [EOL]
Orange Proofer 70 with a printing width of 70 mm.
View product -
Orange Proofer M
Orange Proofer M: Printability tester to produce colour prints with conventional and UV offset
View product -
Orange Proofer x3
Version with a 3-position printing shaft for three densities of three colours on the
View product
![Orange Proofer 70 [EOL]](https://www.igt.nl/wp-content/uploads/OP-70_ZA-700x700-1-300x300.jpg)
