Ink Testers
Filter
Product categories -
Analysis options +
Camera +
Cell depth µm +
Diameter in mm +
Forces +
Inks or liquids +
Lifting system +
Line count l/inch +
Material surface +
Measurement range +
Nr. of doctoring systems +
Nr. of engravings +
Nr. of printing shafts +
Print width in mm +
Screen Angle ° +
Shaft diameter in mm +
Shore A Hardness +
Test method +
Tester +
Type of anilox +
Volume - BCMI +
Volume - ml/m2 +
Water bath and temperature +
Wedge (%) +
Width in mm +
- ×Productcategorieën
- 48 hours
- Accessories
- Accessories
- Miscellaneous
- Test sets
- Top rollers
- Consumables
- Crumpling device
- Electronics testers
- Gloss meters
- Graphic Testers
- Ink kitchen
- Ink Testers
- No categorie
- Other Testers
- Packaging testers
- Paper Testers
- Printing discs
- Printing discs
- Aniloxes
- Gravure discs
- Other printing discs
- Rub tester
- Security
Showing all 39 results
-

C1-5
IGT C1-5: Printability tester to produce colour prints with conventional and UV offset
View product -

C1x3
To print to print three strips, of 15 mm wide, besides each other.
View product -

CG1-5
Printability tester to produce colour prints with conventional and UV offset inks and to
View product -
![CloudOscope [END OF LIFE]](data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIzMDAiIGhlaWdodD0iMzAwIiB2aWV3Qm94PSIwIDAgMzAwIDMwMCI+PHJlY3Qgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgc3R5bGU9ImZpbGw6I2NmZDRkYjtmaWxsLW9wYWNpdHk6IDAuMTsiLz48L3N2Zz4=)
CloudOscope [END OF LIFE]
Instrument to measure the cloudpoint of a resin.
View product -

CT1 for Tubes & Cans
To print directly on cans and tubes with inner diameter between 16 and 68 mm. Print
View product -

CT1x3 for Tubes & Cans
To print directly on closures, cans and tubes with inner diameter between 16 and 68 mm.
View product -

Drying Time Tester
Designed to determine the absorption behaviour and drying time of inks
View product -

F1
Flexo proofer. Can also be used for gravure prints
View product -
![F1 Basic [END OF LIFE]](data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIzMDAiIGhlaWdodD0iMzAwIiB2aWV3Qm94PSIwIDAgMzAwIDMwMCI+PHJlY3Qgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgc3R5bGU9ImZpbGw6I2NmZDRkYjtmaWxsLW9wYWNpdHk6IDAuMTsiLz48L3N2Zz4=)
F1 Basic [END OF LIFE]
The F1 basic is for flexo printing only; pre-set printing conditions.
View product -

F1-100
F1-100: printability tester for flexo inks; 95 mm print width
View product -

G1-5
Printability tester for gravure prints; 50 mm width
View product -
![G1-7 [END OF LIFE]](data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIzMDAiIGhlaWdodD0iMzAwIiB2aWV3Qm94PSIwIDAgMzAwIDMwMCI+PHJlY3Qgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgc3R5bGU9ImZpbGw6I2NmZDRkYjtmaWxsLW9wYWNpdHk6IDAuMTsiLz48L3N2Zz4=)
G1-7 [END OF LIFE]
Printability tester for gravure prints; 70 mm width
View product -

Halftone photopolymer printing discs
Halftone photopolymer printing discs
View product -
![Heatset Dryer [END OF LIFE]](data:image/svg+xml;base64,PHN2ZyB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciIHdpZHRoPSIzMDAiIGhlaWdodD0iMzAwIiB2aWV3Qm94PSIwIDAgMzAwIDMwMCI+PHJlY3Qgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgc3R5bGU9ImZpbGw6I2NmZDRkYjtmaWxsLW9wYWNpdHk6IDAuMTsiLz48L3N2Zz4=)
Heatset Dryer [END OF LIFE]
Instrument to compare the drying of a heat-set ink directly against a standard at
View product -

HydrOscope
Device to measure the emulsification behaviour of an ink.
View product -

IGT FlexoProofer
Flexo proofer.
View product -

IGT UV Dryer 12-1
Compact UV dryer with 1 lamp
View product -

IGT UV Dryer 12-2
Compact UV dryer with 2 lamps
View product -

IGT UV Dryer 12-2-LED395, 2 Hg lamps + LED-395 nm
IGT UV Dryer 12-2-LED395, 2 Hg lamps + LED -395 nm (60 mm curing)
View product -

IGT UV Dryer 12-LED395 nm, (60 mm curing)
IGT UV Dryer 12-LED395 nm, (60 mm curing)
View product -

Laray Viscometer Automated
Device to measure the viscosity of viscous materials, e.g. varnish, high viscous oils
View product -

Orange Proofer
Orange Proofer with manually applied printing force.
View product -

Orange Proofer M
Orange Proofer M: Printability tester to produce colour prints with conventional and UV offset
View product -

Orange Proofer x3
Version with a 3-position printing shaft for three densities of three colours on the
View product -

SimplyMix Ink Mixer
The IGT SimplyMix Ink Mixer is for rapid laboratory mixing of different materials.
View product -

Tack Tester 450
A very accurate and repeatable tack tester using state of the art electronic sensors.
View product -

TackOscope-3 model LC
Instrument to measure the tackiness of a paste ink or varnish and/or to
View product -

TackOscope-3 model SC
Device to measure the tack of a paste ink or varnish.
View product -

Amsterdam H
Automated multi-purpose printability tester with single printing shaft dedicated to the Heliotest; including analysis
View product -

Amsterdam H Basic
Automated multi-purpose printability tester with single printing shaft dedicated to the Heliotest; without camera
View product -

Amsterdam W
Automated multi-purpose printability tester with single printing shaft dedicated to the Westvaco pick test;
View product -

Amsterdam W Basic
Automated multi-purpose printability tester with single printing shaft dedicated to the Westvaco pick test;
View product -

Amsterdam 2
Automated multi-purpose printability tester with dual print shafts.
View product -

Amsterdam 2 Basic
Automated multi-purpose printability tester with dual print shafts; without camera and analysis software.
View product -

Amsterdam 5
Automated multi-purpose printability tester with five printing shafts.
View product -

Amsterdam 6
Automated multi-purpose printability tester with six printing shafts.
View product -

High Speed Inking Unit 4
Ultra-fast inking unit for paste inks
View product -

IGT Ink Rub tester
Ink Rub tester to test rub resistance under specified pressure, speed and (optional) temperature.
View product -

Quartant 2 Abrasion Tester
Rub tester, which is capable of testing four samples simultaneously.
View product




![CloudOscope [END OF LIFE]](https://www.igt.nl/wp-content/uploads/CPScope-01-700x700-1-300x300.png)




![F1 Basic [END OF LIFE]](https://www.igt.nl/wp-content/uploads/F1-Basic-High-Range-1-klein-700x700-e1666260190355-300x300.jpg)


![G1-7 [END OF LIFE]](https://www.igt.nl/wp-content/uploads/433.000.000-G1-7_MGF6174-vs-rvs-1-1-300x300.jpg)

![Heatset Dryer [END OF LIFE]](https://www.igt.nl/wp-content/uploads/871.000-Heatset-Dryer-_MGF3431_rvs-e1666259206946-300x300.jpg)























