TackOscope-3 model SC
Standard delivery time: 8-10 weeks
Article number: 845.000.200
TackOscope-3 model SC: to measure the tack of a paste ink or varnish.
Ink manufacturers, printers and suppliers of raw materials have to meet high quality standards, to ensure the quality of ink in a production and R & D environment. It is important to use an instrument that measures the tack of an ink in a quick and efficient way. High accuracy, low maintenance and simple operation ensure consistent results.
The IGT TackOscope measures the tack of ink and produces reproducible tack values. The Tack Tester uses a dedicated measuring system to measure the tack values of inks. Because of this system, measurements have become far more reliable and consistent than ever before.
Tack values are used by ink manufacturers to ensure the quality of the inks that are supplied to the graphic arts industry. For research the TackOscope is used to develop new inks. Suppliers of raw materials can ensure the quality of their products before these are supplied to their customers.
Because of the high repeatability and reproducibility of the tack values measured by the IGT TackOscope, it is an excellent instrument for use by many companies that operate on an international level. Tack values can be reliably exchanged between facilities to ensure a homogeneous quality throughout the world.
Compared to the TackOscope II the biggest changes are the build in computer and thermostatic waterbath. Besides this the TackOscope III has an automated roller lifting system on the measuring and distribution roller.
With these new features the repeatability and reproducibility have been improved and a fully automated operation is made possible.
You may also like…
Fully automated measurement using autolift function on measuring and distribution roller, integrated computer for data recording and analysis.
- Absolute tack
- Tack stability
- Fount/ink compatibility (LC model only)
- Opening offset plate (LC model only)
The TackOscope III is foreseen with:
- Touch screen operation
- Internal computer
- Internal thermostatic water bath
- Autolift system on the measuring- and distribution roller
- Automated measuring system
- Quick release mechanism for both measuring and distribution roller
- Readout in Tack and/or Newton/m
- Optionally built-in LithOscope feature (TackOscope III LC).
There are two different models available:
TackOscope III model SC – computerised model
TackOscope III model LC – as model SC but with built in LithOscope function
Testing speeds: accurate speed control 0 – 350 m/min
Tack range: accurate tack measurement from 0 – 600 tack
110 – 115 or 230 – 350 V / 50 – 60 Hz
33 cm x 80 cm x 30 cm
|Dimensions||100 × 64 × 67 cm|
|Misting Analysis unit|
|Plate Simulation Test|
|Ink/Water balance test|
|Automated test protocols|
|Automated measuring sequence|
|Readout in N/m (INKO), Tack|
|Speed range and modes|