F1 Basic
Standard delivery time: 6-8 weeks
Article number: 421.000.100
The F1 basic is for flexo printing only, a universal flexo proofer for use with solvent based inks, UV inks and water inks on a range of substrates.
The IGT F1 Basic is equipped with a number of preset / pre-selected standard printing conditions that will cover the most common test applications. This makes the F1 Basic a very user-friendly, reliable and consistent flexo proofer. The IGT F1 Basic ensures consistent results due to simple operation, low maintenance and high accuracy.
- High reproducibility
- Simple to operate
- Consistent results
You may also like…
-
Tack Tester 450
A very accurate and repeatable tack tester using state of the art electronic sensors.
View product -
Quartant Abrasion Tester
Rub tester, which is capable of testing four samples simultaneously.
View product -
TackOscope-3 model SC
Device to measure the tack of a paste ink or varnish.
View product -
Orange Proofer
Orange proofer with manually applied printing force.
View product
Features
Inking and printing sections
- Electronic control of printing force and speed
- Printing speed: 0,3; 0,6; 0,9 m/s
- Anilox/printing force: 100/150; 200/300; 300/450 N
- Maximum substrate thickness: 4 mm
- Printing width on substrate: 40 mm
- Print length ca. 500 mm
- Flexo mode only
Doctor blade
- Doctor blade angle: 60°, dragging
- Doctor blade pressure: 6 – 7 N
Discs
- Flexo aniloxes
- Copper engraved, chromium plated, solid and 4 engravings
- Ceramic, laser engraved, solid
- Range of volumes
General
- Modern styling
- Simple operation; touch screen
- Reliable
- Low initial cost
- Possible to use many substrates and inks
Weight: 35 kg
Dimensions (HxWxD): 35 cm x 60 cm x 35 cm
Electrical connection: 100 – 240 V /2.5 AT / 250 VA / 50 – 60 Hz
Technical details
| Weight | 35 kg |
|---|---|
| Dimensions | 35 × 60 × 35 cm |
| Conformance with standards | |
| Forces | |
| Shaft positioning | |
| Lifting system | |
| Sector type and options | |
| Doctoring system | |
| Printing discs | Ceramic laser engraved anilox discs, Chromium plated in copper engraved, Various line rulings and volumes |
| Sector positioning | |
| Additional items | 496.000.075 IGT UV Dryer 12-1, 1 lamp, 500 W, 496.000.275 IGT UV Dryer 12-1, 2 lamps, 1000 W, 555.000.060 IGT Glossmeter G60 (60°) |
| Inks or liquids | |
| Maintenance | '- Yearly., Information can be obtained from your supplier or the local agent., The annual maintenance and calibration of the tester can be carried out by IGT Testing Systems or companies authorized by IGT Testing Systems. |
| Power Supply Requirements | |
| Guarantee | |
| Dimensions (d x w x h) cm | |
| Print length and width (mm) | |
| Space requirements | |
| Speed range and modes | |
| Substrate requirements | Flexible substrates, Rigid substrates, with a maximum thickness: 4 mm |
| Weight |