-
C1
IGT C1: Printability tester to produce colour prints with conventional and UV offset inks (35mm)INFORMATION -
C1-7
IGT C1-7: Printability tester to produce colour prints with conventional and UV offset inks (70mm)INFORMATIONC1-7
Printability tester to produce colour prints with conventional and UV offset inks, for prints of 70 mm width.
-
Out of Stock
Read moreC1-V
Printability tester for offset with five different printing speeds.INFORMATIONC1-V
Printability tester to produce colour prints with conventional and UV offset inks with five different printing speeds.
-
CG1
Printability tester to produce colour prints with conventional and UV offset inks and to cover with lacquer or varnishINFORMATIONCG1
Printability tester to produce colour prints with conventional and UV offset inks and to cover with lacquer or varnish.
-
CTx3
Printability tester to produce colour prints with conventional and UV offset inks prints on cans and tubes with inner diameter between 16 and 68 mm, width of the print 3×15 mm or 35 mm.
-
Cx3
Printability tester to produce colour prints with conventional and UV offset inks,prints three strips, of 15 mm wide, besides each other.
-
F1
Printability tester for flexo inks, can also be used for gravure prints, performed with anilox and photopolymer cleaning mode.
-
F1 Basic
The F1 basic is for flexo printing only, a universal flexo tester for use with solvent based inks, UV inks and water inks on a range of substrates.
-
IGT UV Dryer 12-2-LED395, 2 Hg lamps, 1000 W + LED -395 nm (80 mm curing)
IGT UV Dryer 12-2-LED395, 2 Hg lamps, 1000 W + LED -395 nm (80 mm curing)INFORMATIONIGT UV Dryer 12-2-LED395, 2 Hg lamps, 1000 W + LED -395 nm (80 mm curing)
Compact UV dryer for use with printability test equipment with 2 lamps.
-
IGT UV Dryer 12-LED395 nm, (80 mm curing)
Compact LED UV dryer for use with printability test equipment with 1 lamp.
-
Orange Proofer 70
Dedicated tester to produce colour prints of conventional and UV offset inks. The Orange Proofer 70 has a printing width of 70 mm.
-
Orange Proofer M
Orange Proofer M: Printability tester to produce colour prints with conventional and UV offset inksINFORMATION -
Orange Proofer x3
Printability tester to produce colour prints with conventional and UV offset inks, with a 3-position printing shaft for three densities of three colours on the same strip.
-
Amsterdam H
Automated multi-purpose printability tester with single printing shaft dedicated to the Heliotest; including analysis software and camera.INFORMATIONAmsterdam H
Automated multi-purpose printability tester dedicated to the Heliotest with a single printing shaft and doctoring system.
This unit is standard delivered with a camera and Heliotest analysis system as well as the complete test set to perform the Heliotest.
-
Amsterdam H Basic
Automated multi-purpose printability tester with single printing shaft dedicated to the Heliotest; without camera and analysis software.INFORMATION -
Amsterdam P
Automated multi-purpose printability tester with single printing shaft dedicated to the Pick test; including analysis software and camera.INFORMATION -
Amsterdam P Basic
Automated multi-purpose printability tester with single printing shaft dedicated to the Pick test; without analysis software and camera.INFORMATIONAmsterdam P Basic
Automated single-purpose printability tester with a single printing shaft. Especially designed to perform the IGT Pick Test.
System is delivered without analysis software and camera.
-
Amsterdam W
Automated multi-purpose printability tester with single printing shaft dedicated to the Westvaco pick test; including analysis software and camera.INFORMATIONAmsterdam W
Automated single-purpose printability tester with single printing shaft, integrated camera based analysis system and rod system. Especially designed to perform the Westvaco Pick Test.
-
Amsterdam W Basic
Automated multi-purpose printability tester with single printing shaft dedicated to the Westvaco pick test; without analysis software and camera.INFORMATIONAmsterdam W Basic
Automated single-purpose printability tester with single printing shaft and rod system. Especially designed to perform the Westvaco Pick Test.
-
Amsterdam 2 Basic
Automated multi-purpose printability tester with dual print shafts; without camera and analysis software.INFORMATION -
High Speed Inking Unit 4
Inking-in up to four printing discs simultaneously, computer controlled, operating temperature between 15 and 45 °C.
