Description
Automated multi-purpose printability tester with single printing shaft.
New range of Printability testers with integrated, camera based, analysis systems. The range consits of devices with one to six printing shafts for maximum flexibility of test methods. The long range of test methods can be extended with user defined methods. With that it is capable to perform all tests of a Global Standard Tester P plus the tests of a Global Standard Tester 3, inclusive combinations of constant and increasing speed in one test method.
Additionally it is prepared to do on-line analysis of pick ISO 3783, mottling, Heliotest, print penetration, IGT roughness and hydro-expansivity with a camera based analysis system.
- 1 to 6 printing shafts, each can be equipped with a drive for printing in register if needed
- Very small interval times, up from 0,02 s
- Large number of test methods
- Very easy in operation
- In-line analysis of several test methods
- Export of scanned images and results
Features
Single printing shaft, constant speed, accellerating speed, combinations of both speed profiles in one test method, interval on multi-revolution prints, camera for image recording, optional analysis of pick ISO 3783, Heliotest, mottling, print penetration, IGT roughness and hydro-expansivity, doctoring station for gravure printing, user programmable, recording of test data and settings, export of data on USB stick.
Video
Technical details
| Weight: | 110 kg |
| Dimensions(L x W x H): | 59 cm x 50 cm x 64 cm |
| Model: | 721.000.000 |
| Main application: | Pick testing Heliotest Gravure printing Hydroexpansivity Density Colour and transparency Print penetration Mottle test Set-off test Toner adhesion |
| Conformance with standards/W-leaflet: | ISO 3783-2006, ISO 2834, ISO 2836, ISO 2846, NEN 1836, NEN 1839, EN 12283, ASTM D7680 |
| Water bath and temperature: | — |
| Speed range and modes: | Constant speed: 0.1 – 4.0 m/s in steps of 0.1 m/s Accelerating end speed: 0.1 – 4.0 m/s in steps of 0.1 m/s |
| Forces: | 100 – 1000 N – step 1 N |
| Substrate requirements: | Flexible substrates |
| Interval time and number: | 1 – 600 s in steps of 1 s |
| Printing shafts type and options: | 1 printing shaft |
| Shaft positioning: | Automatically, programmable |
| Lifting system: | Automatically |
| Print length and width: | 5-50 mm wide, 10-500 mm length (sector dependent), programmable, depends on printing form and test method |
| Printing discs: | Aluminium rubber blanket rubber Heliotest Gravure discs for specific test |
| Sector positioning: | Automatically, programmable |
| Sector type and options: | 180° sector with clamps, 360° sector without clamps with different coverages |
| Doctoring system: | Standard at printing shaft 1 |
| Dispensing system: | — |
| Pre-programmed tests: | Pick Heliotest Gravure Print penetration IGT Roughness Density Colour and transparency Hydroexpansivity Toner adhesion custom made tests on request |
| Analysis options: | Pick ISO 3783, Heliotest, Mottling, Print penetration, IGT Roughness, Hydroexpansivity |
| Interfaces: | USB portal |
| Software updates: | Via USB |
| Data export options: | Recording and export of images, settings and analysis results via USB |
| Additional items: | 466.000.000 High Speed Inking Unit 4 408.000.200 IGT ink Pipette 0.01 ml resolution 408.000.400 IGT ink Pipette 0.001 ml resolution 441.000 Pick Start Viewer PSV 441.000.040 Delamination/Blistering viewer |
| Accessories: | Heliotest set hydroexpansivity set gravure set pick set loose and weakly bound particles set different printing discs for several applications westvaco inking set intaglio inking set |
| Inks or liquids: | Pick test oils, pick inks, penetration liquid, roughness liquid, setting ink, mottling ink, density ink, |
| Inking speeds: | — |
| Inking programs: | — |
| Top rollers: | — |
| Maintenance: | Yearly. The annual maintenance and calibration of the tester can be carried out by IGT Testing Systems or companies authorized by IGT Testing Systems. Information can be obtained from your supplier or the local agent. |
| Compatible instruments: | Amsterdam 2 Amsterdam 5 Amsterdam 6 |
| Measurement range: | — |
| Light source/ power/angle: | — |
| Volume: | — |
| Shelf life: | — |
| Use life: | — |
| Description of property: | — |
| Cleaning: | — |
| Power Supply Requirements: | 115 V 50/60 Hz or 230 V 50/60 Hz |
| Guarantee: | Standard one year |
| Space requirements: | 0.7 m² |
| Standard delivery time: | 10-12 weeks |
Downloads
Please download the brochure in the desired language: